Catalog branch
On Off Valves
Navigate deeper into this branch to reach specialized valve families and model-level pages.
Threaded On/Off Valves
Easy-Access Threaded On/Off Valves
36 products
Extend your reach in hard-to-access areas—turn these valves on and off using a square ratchet to grasp the hole at the end of the handle. Use with water, oil, air, and inert gas.
Flow-Indicating
14 products
Threaded On/Off Valves An easy-to-read flow-indicating handle shows the percentage the valve is open. These valves are for use with water, oil, inert gas, and steam.
Snap-Shut Threaded On/Off Valves
9 products
For applications that require intermittent operation, such as spraying and washing, push or pull the lever on these valves to start flow. They spring closed when the lever is released.
Extended-Stem
16 products
Threaded On/Off Valves For installation through thick insulation, these valves have an extra-long stem.
Compact Threaded On/Off Valves
108 products
Install these valves in tight spots, such as where pipelines are crowded together. They’re less than half as long as standard threaded valves and one-third shorter in height. Use with water, oil, air, and inert gas.
Miniature Threaded On/Off Valves
1 products
With 10-32 UNF threads and a body less than 3/4” long, these valves are often used to control flow in miniature pipelines. They’re rated for use with water, oil, air, and inert gas.
Fast-Acting Threaded On/Off Valves
21 products
Push a button or flip a toggle switch to start or stop flow.
Panel-Mount Threaded On/Off Valves
57 products
Access the handle of these valves while protecting your line behind an instrument panel. They have threads and a hex nut below the handle for panel mounting.
Fast-Acting Panel-Mount
19 products
Threaded On/Off Valves Start or stop flow with the flip of a toggle switch or the push of a button. They fit through a cutout, so the body of the valve stays safe inside your instrumentation panel.
High-Pressure
98 products
Threaded On/Off Valves Rated for at least three times the pressure of standard threaded valves, these valves are used to start and stop the flow of compressed gas, pressurized water, or steam.
Easy-to-Install
13 products
Threaded On/Off Valves For fast installation and removal from pipelines, these valves have a union fitting that disassembles into multiple pieces. They’re for use with water, oil, air, inert gas, and steam.
Swivel Threaded On/Off Valves
4 products
Make connections from any direction—the body of these valves swivels 360° for easy installation. Often used in testing and sampling applications, they quickly open and close with a toggle or button.
Slide-In Threaded On/Off Valves
4 products
Control flow in passageways of manifolds and valve mounting blocks without external pipes. Also known as cartridge valves, they slide into unthreaded holes and secure in place with the included set screw.
Plastic Threaded On/Off Valves
Plastic Threaded On/Off Valves
262 products
with Garden Hose Threads Control flow through any garden hose—the threads on these valves are universally compatible with garden hose connections. Made of PVC, they’re a lightweight and corrosion resistant alternative to metal valves.
Compact Plastic
21 products
Threaded On/Off Valves Fit these short and slim valves in control boxes, panels, and other tight spots. Made of plastic, they won’t pit or corrode on the inside like metal valves, and they’re lighter in weight for easy handling.
Flanged On/Off Valves
Compact Flanged On/Off Valves
17 products
Also known as wafer ball valves, these combine the slim body of a butterfly valve with the high flow rates of a flanged ball valve. Bolt these valves to ANSI flanges—they meet ASME standards for dimensions, material, and pressure-temperature rating. Use with water, oil, air, steam and inert gas such as helium.
Single-Flange On/Off Valves
14 products
Bolt these valves to pipe and pump flanges to start and stop flow before pump maintenance without draining your system.
Plastic Flanged On/Off Valves
10 products
Made of plastic, these valves are a lightweight alternative to metal valves. Union fittings connect the flanges to the valve—with a quick turn, you can install and remove the valve without having to bolt and unbolt the flange each time.
On/Off Valves with Yor-Lok Fittings
On/Off Valves with Yor-Lok Fittings
28 products
For extra gripping power and a strong seal, the Yor-Lok fittings on these valves have two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. These valves are for use with water, oil, air, and inert gas.
Fast-Acting Panel-Mount On/Off
6 products
Valves with Yor-Lok Fittings Flip the toggle to quickly turn these valves on and off. All have threads and a hex nut below the handle for installation in instrument panels. For extra gripping power and a strong seal, they have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. These valves are for use with water, oil, air, and inert gas.
High-Pressure On/Off
8 products
Valves with Yor-Lok Fittings Built to withstand pressures up to 4,500 psi, these valves are ideal for high-pressure lines. For extra gripping power and a strong seal, they have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings
On/Off Valves with Barbed Fittings
On/Off Valves with Barbed Fittings
42 products
These valves have barbs that grip onto tubing, providing a secure hold. Because they’re made of metal, they are more durable than plastic valves and withstand higher temperatures.
Swivel On/Off Valves
6 products
with Barbed Fittings For easy installation from any direction, the body on these valves swivels 360°. They have barbs to securely grip tubing.
Socket-Connect On/Off Valves
Cleaned and Bagged
11 products
Easy-Maintenance Socket-Connect On/Off Valves Often used for oxygen service and other high-purity applications, these valves come cleaned and bagged. Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection. For easy maintenance, they have a three-piece bolted body that disassembles inline so you can access internal components without removing welded connections.
Socket-Connect On/Off Valves
4 products
Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. The socket ends of these valves are lined with PVC for bonding to PVC pipe.
On/Off Valves with Solder-Connect Fittings
Easy-to-Install On/Off Valves
6 products
with Solder-Connect Fittings Install these valves in lines that require frequent maintenance or cleaning. They give you a leak-tight, permanent solder connection to your tubing with the ease of a union fitting to install them without disrupting your line.
Solder-Connect On/Off Valves
3 products
with Gauge Port and Strainer Monitor and maintain flow quality from a single valve. Thanks to their solder-connect union fitting, these valves are especially useful in lines that require frequent maintenance and cleaning.
On/Off Valves with Compression Fittings
Compact On/Off Valves
15 products
with Compression Fittings A short body length and low profile make these valves ideal for installation in tight spaces, such as between pipelines. They have a compression sleeve that bites into tubing as you tighten the nut.
Panel-Mount On/Off Valves
46 products
with Compression Fittings Easily access the handle of these valves while protecting your line behind an instrument panel. A compression sleeve bites into tubing as you tighten the nut, forming a strong seal.
Easy-Maintenance On/Off
10 products
Valves with Compression Fittings With a three-piece bolted body that disassembles for access to internal components, you can clean and repair these valves without removing them from your line. A compression sleeve bites into tubing as you tighten the nut, forming a strong seal.
Plastic On/Off Valves
51 products
with Compression Fittings Use these plastic valves for a lightweight and economical alternative to metal. They have a compression sleeve that bites into tubing as you tighten the nut, forming a strong seal. Use with water, air, and inert gas.
Butt-Weld On/Off Valves
On/Off Valves with Luer Lock Fittings
On/Off Valves for Chemicals
Miniature Threaded On/Off
1 products
Valves for Chemicals To withstand aggressive and corrosive solutions in miniature chemical-processing pipelines, these tiny valves have a chemical-resistant fluoroelastomer seal and a corrosion-resistant 303 stainless steel body.
Ultra-Chemical-Resistant
6 products
Threaded On/Off Valves The most chemical-resistant threaded valves we offer, these have a PTFE seal and an alloy body that can withstand extremely aggressive and corrosive chemicals, such as methyl ethyl ketone and toluene.
Threaded On/Off Valves for Chemicals
18 products
To withstand aggressive and corrosive solutions in chemical-processing applications, these valves have a fluoroelastomer seal and a PVC or CPVC body.
Threaded On/Off Valves with
5 products
Garden Hose Outlet for Chemicals Control the flow of chemical solutions from any garden hose. With a fluoroelastomer seal and polypropylene body, these valves withstand strong chemicals, such as chlorinated water and phosphoric acid.
Threaded Isolation On/Off
1 products
Valves for Chemicals Attach gauges or sensors to these valves so you can remove them for maintenance and calibration without depressurizing your line. They are also known as block and bleed valves.
Easy-Clean Threaded
4 products
On/Off Valves for Chemicals There’s no need to unbolt these valves for cleaning—remove the valve handle and slide the valve apart for inline access to internal components. Also known as elliptical valves, they have a fluoroelastomer seal and a polypropylene body to withstand aggressive and corrosive solutions in chemical-processing applications.
Flanged On/Off Valves for Chemicals
15 products
Bolt these valves to ANSI flanges—they meet ASME dimensional standards. They have a plastic body and a seal that withstand aggressive and corrosive solutions in chemical-processing applications.
On/Off Valves with Luer
12 products
Lock Fittings for Chemicals Made of PVDF to withstand corrosive solutions, these valves are ideal for use in chemical processing. Their luer lock fittings are quick to connect and disconnect for convenience.
On/Off Valves with Yor-Lok
2 products
Fittings for Chemicals For extra gripping power and a strong seal, the Yor-Lok fittings on these valves have two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. These valves have a PTFE seal and a corrosion-resistant Monel ball and body that can stand up to aggressive and corrosive chemicals such as acetone.
On/Off Valves for Drinking Water
Threaded On/Off Valves with Garden
3 products
Hose Outlet for Drinking Water Certified to meet NSF/ANSI 61, these valves control the flow of drinking water. With universally compatible threads, they’ll connect to any garden hose or garden hose fittings.
Compact Threaded On/Off
47 products
Valves for Drinking Water A short body length and low profile make these valves ideal for installation in tight spaces, such as behind panels. They meet NSF/ANSI 61 standards for safe use in drinking water systems.
Easy-to-Install Threaded On/Off
5 products
Valves for Drinking Water A threaded union on these valves makes them easy to install and remove without disrupting your line. They meet NSF/ANSI 61 for safe use in drinking water systems.
Plastic Threaded On/Off
31 products
Valves for Drinking Water Made of plastic, these valves won’t pit or corrode on the inside like metal valves, and they’re lighter in weight. They meet NSF/ANSI 61 for use with drinking water.
Easy-to-Install Plastic Threaded
40 products
On/Off Valves for Drinking Water Disassemble the union fittings on these valves for fast installation and removal from your pipeline. All meet NSF/ANSI 61 for use with drinking water.
Panel-Mount Threaded On/Off
12 products
Valves for Drinking Water Protect your drinking water line behind an instrument panel while keeping the handle handy. These valves have a nut that threads onto the stem to mount the handle onto the panel.
Easy-to-Install Socket-Connect
117 products
On/Off Valves for Drinking Water Ideal for lines that need frequent maintenance, these valves have union fittings that disassemble quickly for removal. They meet NSF/ANSI 61 for use with drinking water.
Plastic On/Off Valves with
35 products
Push-to-Connect Fittings for Drinking Water Insert your tubing into the fittings of these valves with just a push—the internal rings will grip it tight. Made of plastic, these valves are a lightweight alternative to metal valves. All meet NSF/ANSI 61 for safe use with drinking water.
On/Off Valves with Press-Connect
52 products
Fittings for Drinking Water For a permanent, leak-tight connection that doesn’t require heat or soldering, these valves have press-connect fittings that crimp to copper tubing. Install them with a press-connect crimping tool. These valves meet NSF/ANSI 61 for use in drinking water systems.
Plastic On/Off Valves with Barbed
15 products
Fittings for Drinking Water Barbs grip onto tubing to give these valves a secure hold. These valves meet NSF/ANSI 61, so they’re safe to use with drinking water.
Easy-Maintenance On/Off Valves
17 products
with Solder-Connect Fittings for Drinking Water Service these valves without cutting soldered connections. The three-piece bolted body disassembles to access internal components, so you can clean and repair these valves without removing them from your line. They meet NSF/ANSI 61 for safe use in drinking water systems.
Flanged On/Off Valves
46 products
for Drinking Water Bolt these valves onto ANSI flanges. They meet NSF/ANSI standard 61, so they’re safe for use in drinking water systems.
On/Off Valves for Fuel
Threaded On/Off Valves for Fuel
70 products
Protect personnel and equipment in the presence of diesel fuel, fuel oil, gasoline, and kerosene. Fire-tested to meet American Petroleum Institute (API) 607, Edition 4, these valves are designed to securely isolate fluid and prevent the spread of fire.
Compact Threaded
13 products
On/Off Valves for Fuel A low-profile handle allows these valves to fit in low-clearance pipelines for diesel fuel, fuel oil, and kerosene.
Flanged On/Off Valves for Fuel
14 products
Keep your worksite safe when working with diesel fuel, fuel oil, gasoline, and kerosene. Fire-tested to meet American Petroleum Institute (API) 607, these valves are designed to securely isolate fluid and prevent the spread of fire.
On/Off Valves with 37°
5 products
Flared Tube Fittings for Fuel These valves have 37° flared tube fittings that form a tight seal on metal tubing lines to transfer diesel fuel, fuel oil, and gasoline.
On/Off Valves for Food and Beverage
On/Off Valves with Push-to-Connect
279 products
Fittings for Food and Beverage Push tubing into the fittings on these valves and an internal gripping ring and O-ring hold it tight—no heat, solder, or flux required. They meet either NSF/ANSI standards or are FDA compliant for use with food.
On/Off Valves with Sanitary
39 products
Quick-Clamp Fittings for Food and Beverage To maintain sanitary standards in food, beverage, and dairy systems that require frequent cleaning, these valves are made of FDA compliant materials. Polished to a 32 Ra finish, they have smooth internal surfaces that prevent product buildup and inhibit bacteria growth. All have sanitary quick-clamp fittings for easy disassembly.
Sanitary On/Off Valves
8 products
for Food and Beverage 3-A certified as meeting sanitary design standards, these valves control the flow of liquids in food, dairy, pharmaceutical, and cosmetic plants.
On/Off Valves with Barbed
52 products
Fittings for Food and Beverage To prevent leaks, these valves have barbed fittings that grip onto tubing to create a strong hold. They meet NSF/ANSI standards or are FDA compliant for use with food.
On/Off Valves with Butt-Weld
6 products
Fittings for Food and Beverage Weld these valves to unthreaded metal pipe for a permanent, flush connection that permits smooth flow through a line. They have polished internal surfaces for easy cleaning in food and beverage systems.
On/Off Valves with Compression
12 products
Fittings for Food and Beverage Control flow in lines where preventing leaks is critical, such as bottling lines. These valves have a compression sleeve that bites into tubing as you tighten the nut.
On/Off Valves for Natural Gas, Propane, and Butane
Compact Threaded On/Off Valves for
13 products
Natural Gas, Propane, and Butane Install these low-profile valves in low-clearance pipelines for natural gas, propane, and butane.
Threaded On/Off Valves for
24 products
Natural Gas and Propane Use these valves as a mainline shutoff in natural gas and propane pipelines.
On/Off Valves with 45° Flared
3 products
Compression Fittings for Natural Gas, Propane, and Butane With 45° flared tube fittings, these valves form a tight seal on metal tubing lines for natural gas, propane, and butane.
On/Off Valves for Cryogenic Liquids
Threaded On/Off Valves
409 products
for Cryogenic Liquids Use these valves in cryogenic systems to control the flow of liquid nitrogen, carbon dioxide, and argon.
Socket-Connect On/Off
51 products
Valves for Cryogenic Liquids Designed to withstand extremely cold liquid gases, these valves are ideal for liquid nitrogen cooling systems and liquified gas storage. Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection.
On/Off Valves for Refrigerant
Threaded On/Off
29 products
Valves for Refrigerant Often used in HVAC or refrigeration systems, these valves are designed to control the flow of ammonia, nitrogen, and other harsh chemicals.
On/Off Valves with Solder-Connect
24 products
Fittings for Refrigerant Install these valves in HVAC and refrigeration systems to control CO2. For a permanent, leak-tight connection, solder them to metal tubing.
Gradual On/Off Valves
Threaded Gradual On/Off Valves
101 products
Also known as gate valves, these valves gradually open and close to prevent system damage from suddenly starting and stopping flow.
High-Pressure Threaded
21 products
Gradual On/Off Valves Designed for use in refineries and other demanding environments, these valves have a durable body that can withstand nearly twice the pressure of other gradual on/off valves.
Plastic Threaded
8 products
Gradual On/Off Valves
Easy-to-Install Threaded
64 products
Gradual On/Off Valves A threaded union on these valves makes them easy to install and remove without disrupting your line.
FM-Approved Threaded
6 products
Gradual On/Off Valves FM-approved for fire suppression and protection, these valves can isolate sections of the water supply in your facility.
Easy-Maintenance Threaded
56 products
Gradual On/Off Valves Maintain and repair these valves while they’re still inline—you can disassemble the stem so there's no need to unthread the pipe connections. Also known as gate valves, they open and close gradually to prevent sudden starts and stops.
Flanged Gradual On/Off Valves
32 products
Easier to install and remove than threaded or weld-on valves, these valves bolt to flanges. They open and close gradually, preventing system damage from sudden starts and stops in flow.
Tight-Seal Flanged
9 products
Gradual On/Off Valves A rubber-coated gate, also known as a resilient wedge, compresses against the valve seat to give these valves a tight, leakproof seal. Since they bolt onto flanges, they’re easier to install and remove than threaded and weld-on valves.
FM-Approved Flanged
12 products
Gradual On/Off Valves FM-approved, these valves are often used to isolate sections of your facility’s water supply for fire suppression and protection.
Flanged Gradual On/Off Valves for
3 products
Thick Liquids and Dry Materials These valves have a sharp gate that slices through thick slurries, wastewater, dry bulk solids, and other materials that would clog other gradual on/off valves.
Vapor-Sealing Flanged
5 products
Gradual On/Off Valves Control the flow of steam, hazardous gases, and other vapors without risking leaks. These valves have an accordion-like bellows around the stem that expands as they open and contracts as they close, forming an airtight seal.
High-Pressure Socket-Connect
13 products
Gradual On/Off Valves With a forged steel body and bolted construction, these valves can withstand nearly 10 times the pressure of other socket-connect gradual valves.
Plastic Socket-Connect
17 products
Gradual On/Off Valves
Socket-Connect
16 products
Gradual On/Off Valves Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection.
Flexible Joint Gradual On/Off Valves
2 products
Flexible joints keep these valves tightly sealed during pressure changes or vibrations from heavy machinery.
Gradual On/Off Valves for Drinking Water
Plastic Threaded Gradual On/Off
20 products
Valves for Drinking Water A lightweight alternative to metal valves, these plastic valves have NPT connections for use with threaded pipe. All meet NSF/ANSI 61 for use in drinking water systems.
Plastic Socket-Connect Gradual
14 products
On/Off Valves for Drinking Water Bond these valves to plastic pipe with PVC primer and cement to create a permanent, leak-tight connection in drinking water lines. Also known as gate valves, they open and close gradually to prevent damage to your system from sudden changes in flow.
Plastic Flanged Gradual On/Off
10 products
Valves for Drinking Water Easier to install and remove for maintenance than threaded and weld-on valves, these valves bolt and unbolt to flanges. They meet NSF/ANSI 61 for safe use in drinking water systems.
Gradual On/Off Valves
12 products
with Press-Connect Fittings for Drinking Water For a leak-tight connection in drinking water lines without heat or soldering, crimp the fittings on these valves to metal tubing with a press-connect crimping tool. They open and close gradually with multiple turns of the handle wheel to prevent jolts from sudden stops and starts.
Gradual On/Off Valves with Quick-Clamp Fittings for High Vacuum
Gradual On/Off Valves for Chemicals
Solenoid On/Off Valves
Premium Solenoid On/Off Valves
83 products
These top-of-the-line valves are comparable to Asco Red Hat 8210G Series and Parker Gold Ring 23C Series.
High-Pressure Compact
79 products
Solenoid On/Off Valves Control flow in high-pressure lines in tight spots—these valves have the highest pressure ratings of our compact valves.
Premium Compact
25 products
Solenoid On/Off Valves Comparable to Asco Red Hat 8210G Series and Parker Gold Ring 23C Series, these valves meet the highest quality standards.
Compact Solenoid On/Off Valves
59 products
with Push-to-Connect Fittings Insert tubing into the fittings on these valves—no heat, solder, or flux required.
Miniature Solenoid On/Off Valves
6 products
Less than half the size of our other compact valves, these have small pipe connections for miniature lines.
Hazardous Location
25 products
Solenoid On/Off Valves These valves are rated for use in hazardous locations with flammable gas and combustible dust.
Anti-Water-Hammer
11 products
Solenoid On/Off Valves Avoid pressure surges and system shocks that can damage piping by installing these valves that open and close slowly.
Compact Solenoid On/Off
31 products
Valves for Coolant Reduce your pipeline footprint with these low-profile valves that are about half the size of standard valves for coolant.
High-Use Solenoid On/Off
4 products
Valves for Detergent Sturdy internal components resist wear for a long service life in applications with frequent cycling.
Solenoid On/Off Valves for Steam
77 products
Designed to withstand the high temperatures and pressures in steam service applications.
Solenoid On/Off Valves
297 products
for Cryogenic Liquids Built to withstand the extreme cold of liquid nitrogen and liquid oxygen, these valves are cleaned and bagged for high-purity applications.
Food Industry Solenoid On/Off Valves
24 products
These valves have threaded NPT connections.
Food Industry Solenoid On/Off
6 products
Valves with Push-to-Connect Fittings Insert tubing into the fittings on these valves—no heat, solder, or flux required.
Solenoid On/Off Valves for Chemicals
6 products
With a plastic body and a fluoroelastomer seal, these valves can stand up to aggressive and corrosive solutions in chemical-processing applications.
Noncontact Solenoid On/Off Valves
6 products
For applications sensitive to contamination, these valves stop flow without contacting the process media by pressing down on the outside of tubing.
Solenoid On/Off Valves for Natural
16 products
Gas, Propane, and Butane Install these valves in gas pipelines to automatically control the flow of natural gas, propane, and butane to equipment.
Solenoid On/Off Valves with
25 products
Exhaust Port for Natural Gas, Propane, and Butane Often used to control single-acting, spring-return air cylinders, these valves have a third threaded port to exhaust media.
Solenoid On/Off Valves for Fuel Oil
2 products
Supply fuel oil to boilers, furnaces, and other equipment.
Air-Driven On/Off Valves
Easy-Maintenance High-Flow
18 products
Air-Driven On/Off Valves The three-piece bolted body comes apart for access to internal components without unthreading pipe connections and removing the valve from your line.
High-Flow Air-Driven On/Off Valves
84 products
For use in general purpose applications with water, oil, and inert gas.
Heavy-Use High-Flow
9 products
Air-Driven On/Off Valves Limit wear and damage in high-cycling applications—these valves have additional seals that prevent leakage to reduce maintenance time.
Versa-Mount Air-Driven On/Off Valves
42 products
A compact, lightweight actuator and an angular body allow you to install these valves in any mounting orientation.
Compact Versa-Mount
4 products
Air-Driven On/Off Valves About half the height of our other versa-mount valves, these fit in tight spots.
Severe-Duty Air-Driven On/Off Valves
9 products
Also known as diaphragm valves, these have a diaphragm that can handle dirty liquid, slurries, and abrasive media without damage.
Compact Severe-Duty
6 products
Air-Driven On/Off Valves Less than half the height of standard severe-duty valves, these fit in small spaces and low-clearance pipelines.
Flanged Air-Driven On/Off Valves
8 products
Also known as butterfly valves.
Versa-Mount Air-Driven
7 products
On/Off Valves for Chemicals Also known as piston valves, these have a compact, lightweight actuator that allows them to be installed in any mounting orientation. They’re often used in water-treatment applications.
High-Flow Air-Driven On/Off
6 products
Valves for Chemicals Also known as actuated ball valves, these provide higher flow rates than other air-driven valves.
Severe-Duty Air-Driven
3 products
On/Off Valves for Chemicals Also known as diaphragm valves, these have a diaphragm that can handle dirty liquid, slurries, and abrasive media without damage.
Flanged Air-Driven On/Off
4 products
Valves for Chemicals With a ball-valve design, these valves can handle three times the flow of butterfly valves.
Air-Driven On/Off Valves
10 products
for Food and Beverage For food and beverage applications that require frequent cleaning, these valves have quick-clamp connections, polished internal surfaces, and a three-piece bolted body for easy disassembly.
Sanitary Air-Driven On/Off Valves
7 products
Use air pressure to automatically control the flow of liquids in sanitary environments, such as food and beverage processing plants.
Air-Driven On/Off Valves for Fuel
8 products
Use these valves to safely transfer fuel and oil.
Motor-Driven On/Off Valves
Easy-Maintenance
141 products
Motor-Driven On/Off Valves Maintain and repair these valves without unthreading pipe connections. They have a three-piece bolted body that disassembles inline for access to internal components.
Compact Motor-Driven On/Off Valves
3 products
With a slimmer motor than other motor-driven valves, these fit in tight spots.
Easy-to-Install Plastic
32 products
Motor-Driven On/Off Valves Separate the union fittings on each end of these valves for fast installation and removal from pipelines.
Flanged Motor-Driven On/Off Valves
8 products
Also known as butterfly valves.
High-Flow Flanged
8 products
Motor-Driven On/Off Valves Their ball valve design allows these valves to handle three times the flow of butterfly valves.
Motor-Driven On/Off Valves with
6 products
Socket-Connect Fittings for Drinking Water Insert unthreaded pipe into the socket ends and bond with PVC primer and cement to create a permanent, leak-tight connection.
Flanged Motor-Driven
4 products
On/Off Valves for Chemicals For three times the flow of butterfly valves, these have a ball valve design.
Motor-Driven On/Off
14 products
Valves for Chemicals All valves have threaded NPT connections.
Motor-Driven On/Off Valves
25 products
for Food and Beverage For food and beverage systems that require frequent cleaning, these valves have polished internal surfaces and sanitary quick-clamp connections for easy disassembly.
Motor-Driven On/Off Valves for Fuel
8 products
Use these valves to safely transfer fuel and oil.
Batch-Dispensing On/Off Valves
Air On/Off Valves
Safety-Lockout Air On/Off Valves
22 products
A padlock locks the handle of these valves in the shut-off position so you can disconnect air tools safely.
Quiet Safety-Lockout
6 products
Air On/Off Valves These valves have a muffler to reduce exhaust noise. A padlock locks the handle in the shut-off position so you can disconnect air tools safely.
Air On/Off Valves
3 products
Control flow in two directions from a single source—these valves have two balls for independent control and shut-off of each outlet.
Sliding-Sleeve Air On/Off Valves
14 products
Slide the knurled sleeve in one direction to stop flow, and slide it back to start flow again.
Timer-Operated Air On/Off Valves
1 products
Install these valves on your air tank outlet—at the end of the day, they automatically close to save energy.
Electrically Operated Air On/Off Valves
2 products
Also known as solenoid valves, these valves are operated by an electrical signal to turn airflow on or off.
Robot-Arm-Mounted Electrically
2 products
Operated Air On/Off Valves Control the flow of air to robot tools from your robot's program. Often used with air-powered vacuum lifters, these electrically controlled valves open to supply air to the lifter, generating suction to pick up a part.
Air-Operated Air On/Off Valves
8 products
Also known as blocking valves, these valves allow airflow while an air signal is applied to the air pilot. When the signal stops, the valve closes, trapping air in the system.
Foot-Operated Air On/Off Valves
4 products
Turn airflow on and off with your foot to keep your hands free to perform other tasks.
High Airflow Shut-Off On/Off Valves
Hydraulic Valves
On/Off Inline Hydraulic Valves
23 products
Start and stop flow with a quarter turn of the handle. Also known as ball valves.
Lockable On/Off Inline
15 products
Hydraulic Valves Lock the handle using a padlock.
Solenoid-Operated On/Off
8 products
Screw-In Hydraulic Valves Control flow with an electrical signal.
Toggle-Operated On/Off
2 products
Screw-In Hydraulic Valves Push or pull the toggle handle to control flow.
Plumbing Fixtures and Drains
Quarter-Turn Shut-Off
6 products
Valves for Plumbing Fixtures Often used in tight spaces, these valves shut off water with a quarter turn of the handle.
Shut-Off Valves for Plumbing Fixtures
12 products
Also known as water supply stops, these valves shut off water to faucets, toilets, and fountains.
Color-Coded Quarter-Turn Shut-Off
5 products
Valves for Hot and Cold Water Quickly identify hot and cold water lines with these red or blue valves.
Tamper-Resistant Shut-Off
4 products
Valves for Plumbing Fixtures These valves have a removable key handle to prevent unauthorized use.
Self-Closing Valves
1 products
for Plumbing Fixtures Turn the handle to start the flow of water; release the handle and the valve shuts off.
Laboratory Valves
1 products
On/Off Valves with
165 products
Garden Hose Threads Start and stop the flow of water through your garden hose.
Wye-Shaped On/Off Valves
22 products
with Garden Hose Threads Convert one faucet into two, four, or five outlets.
Swivel On/Off Valves with
3 products
Garden Hose Threads Keep fluids flowing—these valves twist and turn to prevent your hose from kinking.